Ashby vs Knots 2 U glare shield PA28R200
For those who have replaced their glareshield. I picked up a Knots 2 u and it's really nice. However, I didn't install yet. It will need a lot of trimming thereby making its return voided. Not sure how that final version would turn out. I like the padding and feel of the material used. Although, It seems a bit flimsy. The Ashby looks solid but without padding since it's fiberglass, it too must be trimmed to fit. I have seen the other threads but none seem current. The installed glareshield to be replaced is the large padded eyebrow version with multiple fasteners attached to the instrument panel. There are 3 vents, I believe there should be only 2 for the 1975 Arrow 2. The 1977 Arrow 3 shows 3 vents and a hump, so that is an issue too. I will have to modify it to fit either replacement.
Does anyone have feedback and user experience with either? Regardless, I will remove the windshield to make the installation/trimming easier.
Comments
Here are pics to view
Hi All,
Ended up reupholstering the old glare shield as both the Ashby and Knots 2 were not as easy to install without major work and time. Looks way better.
JenSuz;
I had a friend who did the K2U replacement. You're right, the feel is very nice, but it kind of "floats" if that makes sense, and I preferred a hard mount.
A few months later, it was my turn, and I chose a path similar to yours. My glareshield was in good condition, but the fabric between it and the windshield base was faded and sun rotted. I removed the fabric and the glue, then painted the metal flat black. Fifteen years later, it still looks great and no need to ever worry about faded material again.
Jim "Doc Griff" Griffin
PA28 - 161
Chicago area