PA28R-201T winterization plate (77 T-Arrow III)

Does anyone have a picture of the piper engine winterization plate installed on the TSIO-360FB oil cooler? I have been trying to figure out where it goes for the 14 years I've owned this airplane. Thanks in advance.

Comments

  • The only real solution is to fly south. ;)

    Eric Panning
    1981 Seneca III
    Hillsboro, OR (KHIO)

  • edited November 2021

    Here you go! This is from my 1977 turbo arrow III


    Scott Sherer
    Wright Brothers Master Pilot, FAA Commercial Pilot
    Aviation Director, Piper Owner Society Forum Moderator and Pipers Author.

    Need help? Let me know!

  • Thank you Scott. Your plate doesn't look like the plate that is stored on my firewall.

    Steve

  • One of them was purchased from Piper and I made the other. But they work perfectly!

    Scott Sherer
    Wright Brothers Master Pilot, FAA Commercial Pilot
    Aviation Director, Piper Owner Society Forum Moderator and Pipers Author.

    Need help? Let me know!

  • My Arrow IV turbo does not have a second winterization plate. (Only the one closest to the cowl) Can anyone provide the P/N for the second one?

    Marc

  • Hi, just make one! a "U" shaped piece of aluminum with a hole on one side for a bolt. If you can't make one, have your mechanic make on for you.

    Scott Sherer
    Wright Brothers Master Pilot, FAA Commercial Pilot
    Aviation Director, Piper Owner Society Forum Moderator and Pipers Author.

    Need help? Let me know!

Sign In or Register to comment.